HP Notebook Series

1–20 Hardware Guide
Hardware Components
Rear Components
Component Description
1
Power connector Connects an AC adapter.
2
Exhaust vent Allows airflow to cool internal
components. Additional vents are on
the bottom of the notebook.
Ä
To prevent overheating, do
not obstruct the vent. Do not
allow a hard surface, such as
an adjoining printer, or a soft
surface, such as bedding or
clothing, to block airflow.
3
External monitor connector Connects an optional external monitor
or overhead projector.
4
Parallel connector Connects an optional parallel device,
such as a printer.
5
RJ-11 jack Connects the modem cable.