HP OneLam 400 A - Page 23

- 23 -
EN

-
side of the laminator (OneLam 400 A3).
Caution!

Do not touch the knife blades in the corner rounder.
D
1 Remove the corner rounder from the packaging (OneLam 400 A4) or remove the corner
rounder from the holder (OneLam 400 A3).
2 Fit a corner of the paper/pouch in the corner rounder (D).
3 Press the corner rounder together.
4 If necessary, repeat the process on all the corners of the paper/pouch.
Î The corners of the paper/pouch have been rounded.