HP P27q G4 Product End-Of-Life Disassembly Instructions

EL-MF877-00 Page 2
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Item Description Notes
Quantity of
items
included in
product
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screw driver of "+" type
200mm
Hexagonal nut screw driver for DVI and D-SUB connector
200mm
Scraper
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Lay the monitor on a flat, soft and clean surface. (NOTE: The model using the curved surface screen, avoid crack)
2. Remove the screws by screw driver, to remove base; and then stand.
3. Use scraper to open all the latches along the edge of the Rear Cover;
4. Lift the Rear Cover and disconnect the connector to remove the Rear Cover
5.
6.
7.
8.
9.
10. Separate the panel, bezel and rear cover.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained
in the product that require selective treatment (with descriptions and arrows identifying locations).

HP P27q G4 Specifications

General

Color depth	8 bit
Color gamut	72 %
Pixel pitch	0.233 x 0.233 mm
Screen shape	Flat
Pixel density	109 ppi
Display diagonal	27 \
Anti-glare screen	Yes
Display technology	LCD
Native aspect ratio	16:9
Vertical scan range	50 - 60 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 80 kHz
Display number of colors	-
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900, 1600 x 1200 (UXGA), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Product color	Black
Market positioning	Business
Pivot angle	-90 - 90 °
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
HDMI version	1.4
AC input voltage	100 - 240 V
Power consumption (max)	36 W
Power consumption (standby)	0.5 W
Power consumption (typical)	32 W
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Package weight	4630 g
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	211.6 mm
Width (with stand)	614.2 mm
Height (with stand)	504.9 mm
Depth (without stand)	50.5 mm
Height (without stand)	367.9 mm
Weight (without stand)	6840 g