HP P6000 User Manual

Data migration licenses
HP P6000 Command View and the MPX200 iSCSI controller support the Data Migration licenses.
Figure 5 Initalized Storage System Properties window
FCIP licenses
The MPX200 iSCSI controller supports FCIP licenses.
Model upgrade licensing
Only data-in-place upgrades are supported. Model upgrade is supported as shown Table 1 (page
21).
Table 1 Model upgrade support
To:You can upgrade from:
EVA4100, EVA6100, or EVA8100EVA3000
EVA4100, EVA6100, or EVA8100EVA4000
EVA4100, EVA6100, or EVA8100EVA5000
EVA6100 or EVA8100EVA6000
EVA8100EVA8000
EVA4400 (HSV300-S), EVA6400, or EVA8400EVA4400 (HSV300)
EVA4400 (HSV300), EVA6400, or EVA8400EVA4400 (HSV300-S)
P6300 (FC-iSCSI), P6300 (iSCSI/FCoE), P6500 (FC, FC-iSCSI, or iSCSI/FCoE)P6300 (FC)
P6500 (FC-iSCSI) or P6500 (iSCSI/FCoE)P6500 (FC)
Upgrading an array model requires a Model Upgrade license. Model Upgrade licenses are effective
only if there is a base permanent license for the lower version of controller. During installation, the
base permanent license is validated and if one is not found, a warning message displays to inform
you that the upgrade license is not in effect because there is no permanent unlimited license.
Licenses to use and license keys 21

HP P6000 Specifications

General

RAID Levels Supported	0, 1, 5, 6, 10
Form Factor	Rack-mountable
Hard Drive Form Factor	2.5", 3.5"
Drive Types Supported	SAS, SSD, SATA
Redundancy	Redundant power supplies
Host Connectivity	Fibre Channel, iSCSI
Operating Temperature	10° to 35°C (50° to 95°F)