HP Pavilion dv1000

1–4 Hardware and Software Guide
Component ID
Power Controls
Component Description
1 Display switch* Initiates standby when the notebook is closed.*
2 Power button* When the notebook is
■ Off, press to start the notebook in Windows.
■ On, briefly press to initiate hibernation.
■ In standby, briefly press to resume from standby
into Windows.
■ In hibernation, briefly press to restore from
hibernation into Windows.
✎
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for at least 4
seconds
to
turn off the notebook.
*This table describes default settings. For information about changing the
function of the display switch or
power button, refer to the “Setting Other
Power Preferences” section in Chapter 3, “Power.”