3–26 Hardware and Software Guide
Power
Conserving Battery Pack Power
Using the following battery conservation settings and procedures
extends the time that a battery pack can run the notebook from a
single charge.
Conserving Power as You Work
To conserve power as you work:
■ Prevent devices you are not using from drawing power from
the notebook. For example:
❏ Turn off wireless and local area network (LAN)
connections and close modem applications.
❏ Disconnect any external devices from the notebook that
are not plugged into an external power source.
❏ Stop or remove an inserted PC Card.
❏ Disable or remove an inserted digital memory card.
❏ Turn off a device connected to the S-Video–out jack.
■ Use optional, externally powered speakers instead of the
internal speakers whenever possible. When you must use
the
internal speakers, minimize system volume. Volume can
be adjusted with the volume buttons.
■ Minimize screen brightness.
❏ To decrease screen brightness, press the fn+f7 hotkey.
❏ To increase screen brightness, press the fn+f8 hotkey.
■ If you leave your work, initiate standby or hibernation, or
shut down the notebook.
To Next Page
Loading...
