HP Pavilion dv1000

3–28 Hardware and Software Guide
Power
Replacing a Battery Pack
Ä
CAUTION: To prevent loss of work when removing a battery pack that is
the only power source, shut down the notebook or initiate hibernation. (If
you initiate hibernation, do not begin the following procedure until the
power/standby lights are turned off, indicating that hibernation is
complete.)
Removing a Battery Pack
Although battery packs vary by model, the removal procedure is
the same for all models.
To remove a battery pack:
1. Turn the notebook upside down.
2. Slide the battery release latch 1 to release the battery pack.
3. Pull the battery pack out of the battery bay 2.