Stand
Description Spare part number
Stand 669988-001
The stand is secured with four screws that you can remove from the inside of the rear cover.
To remove the stand:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 34).
2. Remove the rear cover (see
Rear Cover on page 35).
3. From the inside of the rear cover, remove the four screws that secure the stand to the cover.
Figure 7-2 Removing the stand screws
36 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
To Next Page
Loading...
