To Next Page

To Previous Page

4 Removal and replacement procedures

preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

● Non-conductive, non-marking pry tool

● Magnetic Phillips P1 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly

and assembly procedures.

NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying

screws) away from the work area to prevent damage.

Plastic parts

IMPORTANT: Using excessive force during disassembly and reassembly can damage plastic parts.

Cables and connectors

IMPORTANT: When servicing the computer, be sure that cables are placed in their proper locations during

the reassembly process. Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat

the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid

bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught

or snagged by parts being removed or replaced. Handle ex cables with extreme care; these cables tear

easily.

Tools required 29

Questions and Answers:

Need help?

Do you have a question about the HP ProBook 650 G5 and is the answer not in the manual?

HP ProBook 650 G5 Specifications

General

RAM	Up to 32 GB DDR4-2400 SDRAM
Storage	Up to 1 TB HDD or 512 GB SSD
Operating System	Windows 10 Pro
Battery	HP Long Life 3-cell, 48 Wh Li-ion
Processor	8th Generation Intel Core i5/i7
Display	15.6-inch, HD (1366x768) or FHD (1920x1080)
Graphics	Intel UHD Graphics 620
Weight	Starting at 2.18 kg
Ports	1 USB 3.1 Type-C, 2 USB 3.1 Gen 1, 1 HDMI 1.4, 1 RJ-45, 1 headphone/microphone combo
Wireless	Intel Dual Band Wireless-AC 802.11a/b/g/n/ac (2x2) Wi-Fi and Bluetooth Combo