Optical drive
Table 5-4 Optical drive descriptions and part numbers
Description Spare part number
DVD-ROM combo drive L23122-001
DVD writer drive L23123-001
Before removing the optical drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Remove the bottom cover (see Bottom cover on page 35).
3. Remove the battery (see Battery on page 36).
Remove the optical drive:
1. Loosen the captive Phillips screw (1) that secures the drive to the computer.
2. Use a tool to press the release lever to release the drive (2).
3. Slide the optical drive out of the computer (3).
Reverse this procedure to install the optical drive.
Component replacement procedures 39
To Next Page
Loading...
