Smart card reader
Table 6-11 Smart card reader descriptions and part numbers
Description Spare part number
Smart card reader board L58695-001
Smart card reader bracket (included in Bracket Kit) L59054-001
Smart card reader cable (included in Cable Kit) L09583-001
Before removing the smart card reader, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Remove the following components:
a. Bottom cover (see Bottom cover on page 35)
b. Battery (see Battery on page 36)
c. Optical drive (see Optical drive on page 39)
d. Hard drive (see Hard drive on page 40)
e. Solid-state drive or Optane memory module (see Solid-state drive on page 42)
f. WWAN module and bracket (see WWAN module on page 43)
g. Keyboard (see Keyboard on page 47)
h. Internal frame (see Internal frame on page 51)
Remove the smart card reader:
1. Disconnect the system board cable from the smart card reader board ZIF connector (1).
Component replacement procedures 63
To Next Page
Loading...
