HP ProDesk 400 G2

120GB SATA 2.5" Opal1 SED Solid State Drive
Unformatted Capacity 120GB SATA 2.5" Opal1 SED Solid State Drive
Architecture Self-Encrypting (SED) Solid State Drive with 20nm MLC NAND Flash and SATA interface
Interface Serial ATA (6.0 Gb/s)
NAND Flash 20nm MLC NAND Flash
Form Factor 2.5 inch
Thickness 7 mm
Weight Up to 78 g
Bandwidth Performance Sustained Sequential Read: Up to 540 MB/s
Sustained Sequential
Write:
Up to 480 MB/s
Random 4k Read: Up to 41K IOPs
Random 4k Write: Up to 80K IOPs
Power SATA power consumption: 195 mW (active average); 125 mW (idle average)
Mean Time Between Failure
(MTBF)
1,200,000 hours
Environmental
(all conditions, non-condensing)
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Shock: 1,500 G/0.5 ms
1TB 10K SATA 6.0Gb/s 3.5" Hard Disk Drive
Capacity 500,107,862,016 bytes
Rotational Speed 7,200 rpm
Interface Serial ATA 2.0 (6.0 Gb/s)
Buffer Size 16 MB
Logical Blocks 976,773,168
Seek Time (typical reads,
includes controller overhead,
including settling)
Single Track: 2.0 ms
Average: 12 ms
Full-Stroke: 25 ms
Height (nominal) 0.374 in/9.5 mm
Width (nominal) Media diameter: 2.5 in/63.5 mm
Physical size: 2.75 in/70 mm
Operating Temperature 41° to 131° F (5° to 55° C)
QuickSpecs
HP ProDesk 400 G2 Microtower Business PC
Technical Specifications - Hard Disk and Solid State Storage
DA - 14982 North America — Version 1 — May 28, 2014 Page 36