Removal and replacement procedures 37
Table 9 Drive Cable Connections / 2 3.5” Hot-plug HDD Model
Cable To System Board Designator
SATA 2 connector Backplane J49
SATA 3 connector Optical disc drive J52
Table 10
Drive Cable Connections / 4 3.5” Hot-plug HDD Model
Cable To System Board Designator
SATA 1 connector Backplane J41
SATA 2 connector Backplane J49
SATA 3 connector Backplane J52
SATA 4 connector Backplane J55
SATA 5 connector Optical disc drive J57
Table 11
Drive Cable Connections / 4 3.5” Non-hot-plug HDD
Cable To System Board Designator
SATA 1 connector HDD 1 J41
SATA 2 connector HDD 2 J49
SATA 3 connector HDD 3 J52
SATA 4 connector HDD 4 J55
SATA 5 connector Optical disc drive J57
Drive bay configuration
The server supports a maximum of 2 to 5 drive bays --- 2 drive bays for 3.5 in. hard disk drives, or 2
drive bays for 3.5 in. hard disk drives and 1 drive bay for 9.5mm (0.37 in.) optical disc drive, or 4
drive bays for 3.5 in. hard disk drives, or 4 drive bays for 3.5 in. hard disk drives and 1 drive bay
for 9.5mm (0.37 in.) optical disc drive.
To Next Page
Loading...
