Removal and replacement procedures 39
Figure 6 System Drive Bays / 4 3.5” HDD Non-hot-plug Model
Item Description
1 9.5mm (0.37 in.) DVD ROM optical drive (optional)
2 3.5 in. hard disk drive bays (4)
The HDD bays can support SATA drives.
Optical Media Device Bay
The optical media device bays of the servers with 2 HDDs and 4 HDDs both support a 9.5 mm (0.37
in.) DVD ROM. The following procedure is an example using the server with 4 HDDs model.
To remove the optical drive carrier:
1. Remove the top cover and then unplug the SATA and power cables.
2. Loosen the screws.
To Next Page
Loading...
