Removal and replacement procedures 81
Figure 70 Removing the BBWC Assembly
To reinstall the BBWC assembly:
1. Align the locking tabs on the BBWC assembly to their holes on the tray.
2. Press the BBWC assembly into the tray, and then push it along the direction of the arrow to lock
the locking tabs.
Figure 71
Reinstalling the BBWC Assembly
System board removal and replacement procedure
To remove the system board:
1. Remove the top cover.
2. Remove the air baffle and all cables from the system board.
3. Loosen the nine screws that secure the system board to the chassis.
To Next Page
Loading...
