Removal and replacement procedures 44
o
M.2 SSD enablement board removal from the system board
o M.2 SSD enablement board removal from the FlexibleLOM riser cage
To replace the component, reverse the removal procedure.
Fan blank
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To Next Page
Loading...
