Removal and replacement procedures 56
o
Low-profile expansion board removal from the FlexibleLOM riser cage
o FlexibleLOM adapter removal from the FlexibleLOM riser cage
8. If you are removing a storage controller board with a cache module installed, remove the cache
module.
To replace the component, reverse the removal procedure.
Primary PCI riser cage blank
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To Next Page
Loading...
