HP SimpliVity OmniCube CN-3400 - About Hardware Upgrades; About Firmware Revisions

16 About hardware upgrades
• EMC EN 55022:2010/CISPR 22:2010 EN 55024:2010/CISPR 24:2010 EN 61000-3-2:2006 +A1:2009
• +A2:2009/IEC 61000-3-2:2005 +A1:2008 +A2:2009 (Class D) EN 61000-3-3:2008/IEC 61000-3-3:2008
• SAFETY EN 60950-1:2006 +A1:2010 +A2:2013 +A11:2009 +A12:2011/IEC 60950-1:2005 ed2
+A1:2009 EN 62311:2008
• RoHS EN 50581:2012
• IEC 60950-1/A2:2013
• PTI-1406324-000 od 09.07.2014
• US CFR Title 47, FCC Part 2, 15 ANSI C63.4 2009 Canadian ICES-3(A)/NMB-3(A), Issue 5
• SM SR EN 60950-1:2010/A1:2012,GOST 30805.22:2002
• GB17625. 1-2012;GB4943. 1-2011;GB9254-2008 (CLASS A)
• ZEK 01.4-08
About hardware upgrades
If you need to upgrade the server hardware components, contact Customer Support.
WARNING:
Never install additional options other than those approved for installation by Customer
Support. Doing so will void your warranty and might cause serious server instability and
potential data loss.
About firmware revisions
The OmniStack software requires that each supported platform is running a specific firmware revision.
To avoid compatibility issues, contact Customer Support before making any firmware changes.
NOTE:
If your server, or any management software, has automatic software updates enabled, disable
this feature to avoid installing unsupported firmware revisions.