Delete a Security Key 39
4. Select Yes to confirm that you want to change the Security Key for the selected controller.
5. Type a new passphrase and then type the old passphrase.
6. Record the new passphrase in a secure location in case you need to recover it.
7. Select OK.
8. Select Yes to confirm.
Delete a Security Key
Before you begin
You have completed these tasks:
• Migrated all virtual machines (VM) off of the OmniCube host.
• Displayed the PERC BIOS Configuration Utlity on the computer connected to the OmniCube host. See
Access the PERC BIOS Configuration Utility on page 32.
Procedure
1. Use the arrow keys to select the PERC H730P Mini controller.
2. Select the PERC H730P Mini controller on the Virtual Disk Management screen.
To Next Page
Loading...
