40 Erase a drive that supports encryption
3. Select one of the disk groups.
4. Press F2 and select Delete Disk Group.
5. Press Enter and select Yes to confirm.
6. Select the other disk group and repeat Step 4 on page 40 and Step 5 on page 40 to delete it.
7. Select the PERC H730P Mini controller.
8. Press F2 and select Delete Key.
9. Select Yes to confirm deleting the key.
The key is deleted and the disks are now erased.
Erase a drive that supports encryption
Before you begin
You have completed these tasks:
To Next Page
Loading...
