HP StorageWorks D2600 User Manual

Power supply module
Two power supplies provide the necessary operating voltages to all controller enclosure components.
If one power supply fails, the remaining power supply is capable of operating the enclosure. (Replace
any failed component as soon as possible.)
NOTE:
If one of the two power supply modules fails, it can be hot-replaced.
Power supply LED
One LED provides module status information.
DescriptionLED statusLED color
No powerOffOff
Normal, no fault conditionsSolidGreen
Hardware14

HP StorageWorks D2600 Specifications

General

Interface	SAS
Host Interface	6 Gb/s SAS
Redundant Power Supplies	Yes
Hot Plug Drives	Yes
Product Type	Disk Enclosure
Supported Drive Type	SAS, SATA
Rack Height	2U
Cooling	Redundant fans
Drive Bays	12
RAID Support	Depends on the controller
Compatible Controllers	HP Smart Array P411, P812
Power Supply	Two hot-plug, redundant power supplies
Weight	48 lb (21.8 kg) (without drives)