HP StorageWorks P9000 - Page 99

// MSGLEVEL=(1,1),MSGCLASS=X,NOTIFY=-----(3)
//*********************************************************************
//*
//* All Rights Reserved. Copyright (C) 2003, 2011, Hitachi, Ltd.
//*
//*********************************************************************
//*
//* This JCL executes SMP/E DDDEF for the distribution libraries and
//* the target libraries.
//*
//* Instructions:
//* 1) Modify the JOB statement to match your environment.
//* 2) Modify the following values to match your environment:
//*
//* Value Description
//* -------- --------------------------------
//* GIMSMP Installation SMP/E program
// SET PFX=HPQYK Prefix of SMP files-----(4)
// SET VRM=Vnnnnnn Second level name (VER REL MOD)
//* #smp01 DASD volume serial for SMPTLIB
//*
//* 3) Submit the JCL to begin execution of SMP/E DDDEF.
//*
//*********************************************************************
//S1 EXEC PGM=GIMSMP
//SMPCSI DD DISP=SHR,DSN=
//SMPOUT DD SYSOUT=*
//SMPRPT DD SYSOUT=*
//SMPLIST DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//SMPWRK1 DD UNIT=SYSDA,
// SPACE=(3120,(0364,0380,500)),
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK2 DD UNIT=SYSDA,
// SPACE=(3120,(0364,0380,500)),
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK3 DD UNIT=SYSDA,
// SPACE=(3120,(0364,0380,500)),
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK4 DD UNIT=SYSDA,
// SPACE=(3120,(0364,0380,500)),
// DCB=(RECFM=FB,LRECL=80,BLKSIZE=3120)
//SMPWRK6 DD UNIT=SYSDA,
// SPACE=(3120,(0364,0380,500)),
// DCB=(RECFM=FB,BLKSIZE=3120)
//SYSUT1 DD UNIT=SYSDA,SPACE=(3120,(0380,0760))
//SYSUT2 DD UNIT=SYSDA,SPACE=(3120,(0380,0760))
//SYSUT3 DD UNIT=SYSDA,SPACE=(3120,(0380,0760))
//SYSUT4 DD UNIT=SYSDA,SPACE=(3120,(0038,0100)),
// DCB=(LRECL=80,BLKSIZE=3120,RECFM=FB)
//* The following data sets would likely be specified in a
//* cataloged procedure customized for a particular customer.
//SMPPTS DD DISP=SHR,DSN=
//SMPLOG DD DISP=MOD,DSN=
//SMPLOGA DD DISP=MOD,DSN=
//SMPCSI DD DISP=SHR,DSN=
//GLOBAL DD DISP=SHR,DSN=
//TGT1 DD DISP=SHR,DSN=
//DLIB1 DD DISP=SHR,DSN=
//* SMP/E control record input
//SMPCNTL DD *
SET BDY(GLOBAL).
UCLIN.
ADD GLOBALZONE ZONEINDEX(
(DLIB1,HPQYK.SMPCSI.CSI,DLIB),-----(5)
HPQYK2DF (Defining Distribution and Target Libraries) 99