DELETE IBM.HWJ9143.F3 -----(16)
DELETE IBM.JWJ9144.F1 -----(17)
SET MAXCC = 0
/*
//*********************************************************************
//* TSO receive to restore portable PDS from BINARY FTP
//*********************************************************************
//S1 EXEC PGM=IKJEFT01
//SYSTSPRT DD SYSOUT=*
//SYSTSIN DD *
RECEIVE INDSN(CHYLnnn.SMPMCS.XMIT)
DSNAME('HP.CHYLnnn.SMPMCS') + -----(18)
VOLUME(#tso01) -----(19)
RECEIVE INDSN(CHYLnnn.F1.XMIT)
DSNAME('HP.CHYLnnn.F1') + -----(20)
VOLUME(#tso01) -----(21)
RECEIVE INDSN(CHYLnnn.F2.XMIT)
DSNAME('HP.CHYLnnn.F2') + -----(22)
VOLUME(#tso01) -----(23)
RECEIVE INDSN(CHYLnnn.F3.XMIT)
DSNAME('HP.CHYLnnn.F3') + -----(24)
VOLUME(#tso01) -----(25)
RECEIVE INDSN(CHYLnnn.F4.XMIT)
DSNAME('HP.CHYLnnn.F4') + -----(26)
VOLUME(#tso01) -----(27)
RECEIVE INDSN(CHYLnnn.F5.XMIT)
DSNAME('HP.CHYLnnn.F5') + -----(28)
VOLUME(#tso01) -----(29)
RECEIVE INDSN(CHYLnnn.F6.XMIT)
DSNAME('HP.CHYLnnn.F6') + -----(30)
VOLUME(#tso01) -----(31)
RECEIVE INDSN(CHYLnnn.F7.XMIT)
DSNAME('HP.CHYLnnn.F7') + -----(32)
VOLUME(#tso01) -----(33)
RECEIVE INDSN(CHYLnnn.F8.XMIT)
DSNAME('HP.CHYLnnn.F8') + -----(34)
VOLUME(#tso01) -----(35)
RECEIVE INDSN(CHYLnnn.F9.XMIT)
DSNAME('HP.CHYLnnn.F9') + -----(36)
VOLUME(#tso01) -----(37)
RECEIVE INDSN(HWJ9143.F1.XMIT)
DSNAME('IBM.HWJ9143.F1') + -----(38)
VOLUME(#tso01) -----(39)
RECEIVE INDSN(HWJ9143.F2.XMIT)
DSNAME('IBM.HWJ9143.F2') + -----(40)
VOLUME(#tso01) -----(41)
RECEIVE INDSN(HWJ9143.F3.XMIT)
DSNAME('IBM.HWJ9143.F3') + -----(42)
VOLUME(#tso01) -----(43)
RECEIVE INDSN(JWJ9144.F1.XMIT)
DSNAME('IBM.JWJ9144.F1') + -----(44)
VOLUME(#tso01) -----(45)
END
/*
HPQYKSIN (Simple Installation)
The method for modifying HPQYKSIN, which performs a simple installation, is explained below.
The following numbers correspond to the numbers appearing on the right side of the sample JCL.
Modify the underlined portions in the sample JCL as follows:
(1)-(3)
Modify the JOB text to match the installation environment.
92 Modifying Sample JCL
To Next Page
Loading...
