HP StorageWorks XP10000 Owner's Guide

XP10000 hardware 29
5 REMOTE
MAINTENANCE
PROCESSING
LED
(Amber)
During normal operation, this LED may be on if
remote maintenance is occurring. Remote
maintenance can occur and this LED can light
only when the REMOTE MAINTENANCE
ENABLE/DISABLE switch is in the ENABLE
position.
On: Remote maintenance is in progress. An HP
support representative is probably working on
the system. The system remains online and
accepting data.
6 REMOTE
MAINTENANCE
ENABLE/DISABLE
Switch Used to permit remote service maintenance.
During normal operation, this switch should be in
the ENABLE position.
Disable: No one can provide remote
maintenance.
Enable: An HP support representative can
provide remote maintenance.
Caution: Do not change the switch position
unless directed to do so by HP service personnel.
7 BS-ON LED
(Amber)
During normal operation, this LED should be on.
On: The disk array is plugged in and receiving
power from the primary AC outlet. The SVP is
receiving power from the outlet.
Off: The disk array is not receiving power from
the primary AC outlet. Check the electrical
outlets in your building.
Table 3. Control panel functions (continued)
Item Label Indicator Description

HP StorageWorks XP10000 Specifications

General

Brand	HP
Model	StorageWorks XP10000
Category	Disk array system
Language	English