More information
RBSU settings (page 18)
iLO4 settings (page 18)
Upgrading BIOS or hardware firmware (page 9)
RBSU settings
Change the RBSU settings, as shown in the following table.
Table 4 RBSU settings for HPE StoreOnce 4900
Change toSub Menu 2Sub Menu 1Top Menu Item
Maximum PerformanceHP Power ProfilePower Management
Options
HP Static High Performance ModeHP Power Regulator
DisabledIntel QPI Link Power
Management
Advanced Power
Management Options
No C-statesMinimum Processor
Idle Power Core State
No Package StateMinimum Processor
Idle Power Package
State
Maximum PerformanceEnergy/Performance
Bias
Optimized for PerformanceDIMM Voltage
Preference
Maximum PerformanceMemory Power
Savings Mode
Current Date and
Current Time
Date and Time
Ensure the field has
no text, i.e. it is blank
Other TextServer Info TextServer Asset Text
Increased CoolingThermal ConfigurationAdvanced Options
The serial number for
the HPE StoreOnce
Backup.
Serial NumberService Options
746355-B21Product ID
iLO4 settings
Select the DNS/DHCP option and toggle DHCP Enable to OFF.
If DHCP is set to OFF, select NIC and TCP/IP and configure the network static IP addresses
18 System motherboard replacement
To Next Page
Loading...
