Table 8 Hard disk LED sequences (continued)
InterpretationFault/UID LED (amber/blue)Online Activity LED (green)
stripe size migration, or RAID
migration.
The drive is active, but a predictive
failure alert has been received for this
Amber flashing regularly (1 Hz)Flashing irregularly
drive. Replace the drive as soon as
possible.
The drive is active and it is operating
normally.
OffFlashing irregularly
A critical fault condition has been
identified for this drive and the
OffOff
controller has placed it offline. Replace
the drive as soon as possible.
A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.
Amber flashing regularlyOff
The drive is offline, a spare, or not
configured as part of an array.
OffOff
1 Gbit ethernet port LEDs
The 1 Gbit ethernet LAN ports have two LEDs on the rear of the HPE StoreOnce Backup system.
Figure 21 1 Gbit ethernet LAN port LEDs
Steady green: The LAN connection is using 10 Mbps/100
Mbps link.
1. LAN network speed LED indicator
Steady amber: The LAN connection is using a 1 Gbit
ethernet link.
Off: No connection.
Flashing green: Ongoing network data activity.2. LAN activity status LED indicator
Off: No network data activity or no connection.
10 Gbit ethernet card LEDs
Each 10 Gbit ethernet card has two LEDs, as illustrated below.
1 Gbit ethernet port LEDs 43
To Next Page
Loading...
