6. You can check the configuration file using:
net show config current
Network Name: current
Network Description: bondedports
Write Protected: no
DNS Servers:
----------------------
Number of Networks:2
----------------------
Network: bond_net1
----------------------
IP Address: 192.168.1.100
Net Mask: 255.255.255.0
Domain Name:
Gateway: 192.168.1.1
Bonding Mode: 6 (Active Load Balance Bonding)
Default Network: yes
Interfaces:eth0,eth1
----------------------
Network: bond_net2
----------------------
IP Address: 192.168.2.100
Net Mask: 255.255.255.0
Domain Name: mycompany.local
Gateway: 192.168.2.1
Bonding Mode: 6 (Active Load Balance Bonding)
Default Network: no
Interfaces:eth4,eth5
Command Successful
28 Network configuration
To Next Page
Loading...
Need help?
General
