HP StoreOnce G3 User Manual

3. Click Discover Portal... You must enter the IP address or fully qualified domain name of the
HP StoreOnce Backup system (for example, mystoreonce.mydomain.com) to add it as a target
portal for the host on the Discovery tab. Do not change the Port; it should be 3260.
4. Click on OK to add the target portal to the Discovery page. You may need to click Refresh.
iSCSI Initiator (optional, VTL only) 33

HP StoreOnce G3 Specifications

General

Brand	HP
Model	StoreOnce G3
Category	UPS
Language	English