Deploying with PXE
1.
Ensure that IBR.exe and Flash.img are stored in the same directory on the server.
2.
Add [full path]\IBR.exe -y [full path]\Flash.img hd0 to the PXE command file,
and run it
To view the IBR command line options:
At the command prompt, type IBR.EXE /? and press Enter.
Refer to Appendix C, “Configuring a PXE Server under Microsoft RIS” for instructions on setting up a PXE
Server using Microsoft RIS. See your documentation if using a different PXE server, such as Altiris
Deployment Solution.
46 Chapter 4 Restoring the Flash Image ENWW
To Next Page
Loading...
