Authorizing Remote Installation Services (RIS PXE
Server)
If you have installed RIS on a server other than the server running DHCP, authorize PXE with DHCP as
follows:
1.
Record the IP address of the RIS PXE Server.
2.
Log on to the DHCP Server as administrator.
3. From the Control Panel, double-click Administrative Tools.
4. Double-click DHCP.
5. Right-click DHCP (just above the domain name) and select Manage Authorized Servers.
6. Click Authorize.
7. Type the IP address of your RIS PXE server and click OK.
8. Click OK.
9.
Log off from the DHCP Server.
60 Appendix C Configuring a PXE Server ENWW
To Next Page
Loading...
