To Next Page

To Previous Page

Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar

cover.

Description Spare part number

500-GB, 7200-rpm 634934-001 or

574875-001

320-GB, 7200-rpm 603783-001

320-GB, 5400-rpm 622643-001

160-GB, 7200-rpm 579045-001

Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and

hard drive screws)

497744-001

Before removing the hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power cord.

4. Remove the battery (see

Battery on page 38).

Remove the hard drive:

1. Position the computer with the front toward you.

2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to

the computer.

3. Lift the left side of the hard drive cover (2) and swing it to right.

40 Chapter 4 Removal and replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP TOUCHSMART TX2 and is the answer not in the manual?

HP TOUCHSMART TX2 Specifications

General

RAM	4 GB DDR2
Resolution	1280 x 800
Graphics	ATI Radeon HD 3200 Graphics
Operating System	Windows Vista Home Premium
Battery	6-cell Lithium-Ion Battery
Wireless	802.11a/b/g/n
Bluetooth	Bluetooth 2.0
Storage	320GB HDD
Display	12.1" WXGA High-Definition HP BrightView Display
Optical Drive	LightScribe SuperMulti 8X DVD±RW with Double Layer Support
Webcam	HP Webcam