HP XP1024 System Configuration

To configure the newly-installed disk array devices:
1. Select Disks and File Systems, then select Disk Devices.
2. Verify that the new disk array devices are displayed in the Disk Devices window .
3. Selectthedevicetoconfigure, select the Actions menu, select Add, and then select
Using the
Logical Volume Mana ger.
4. In the Add a Disk Using LVM window, select Create... or Extend a Volume Group.
5. In the Create a Volume Group window, enter the name of the new or existing
volume group to assign the new device to, and then click OK twice. The Add a Disk
Using L
VM window now displays the volume group name.
6. Select Add New Logical Volume to o pen the Create New Logical Volumes window.
7. In the Create New Logical Volumes window, enter the n ame, size in megabytes, and
mount directory for the new logical volume. Select Add, and then click OK twice.
8. Repeat steps 3–7 for each new disk device on the disk array.
60
Reference information for SAM

HP XP1024 Specifications

General

Brand	HP
Model	XP1024
Category	Storage
Language	English