HP Z238

Workstation specications
Processor
technology
●
Intel Series C236 chipset
●
Support for the Intel Xeon Processor E3 v5 Family or sixth-generation Intel Core processors up to 80 W
●
Integrated 2-channel memory controller
●
Microarchitecture improvements
●
Integrated graphics (some models)
●
Advanced Vector Extensions (AVX) to increase oating point performance
●
Intel DMI3 interface connecting the processor to the I/O controller
Power supply
●
280 W, 85% ecient, compatible with ENERGY STAR Version 6.1 requirements
Memory
technology
●
Dual in-line memory modules (DIMMs) based on DDR4 2133MHz technology
●
Supports error checking and correcting (ECC) and non-ECC DIMMs
●
Two direct-attach memory channels enable low-latency access and fast data transfer
●
Up to 64 GB system memory (16 GB DIMMs)
●
2133 MHz 4, 8, 16 GB ECC unbuered DIMM
●
2133 MHz 4, 8, 16 GB non ECC unbuered DIMM
Graphics cards
●
Up to PCIe Gen 3 bus speeds.
●
PCIe x16 cards are supported in the x16 slot closest to the processor.
●
Up to three displays with integrated Intel HD graphics (depending on processor type).
●
Windows 10 supports display output from both integrated graphics capable processors and discrete
graphics cards. This feature can be changed through the Computer Setup (F10) Utility.
NOTE: Most supported Intel Core processors provide Intel HD Graphics 510/530; Intel Xeon processors with
model designations that end in "___5" provide Intel HD Graphics P530.
NOTE: To drive more than three displays, use Computer Setup (F10) Utility to intermix integrated Intel HD
graphics and discrete graphics cards (with four or more displays, HP recommends using only discrete
graphics cards).
I/O technology
●
RAID congurations for SATA RAID levels 0, 1
●
Two external and one internal USB 2.0 ports
●
Eight external and one internal USB 3.0 port
●
Three DisplayPort 1.2 connectors
●
Serial header that can be used with an optional PCI bulkhead connector
HP Z238 Workstation components 7