HP Z24f G3

3
2 Monitor features
This chapter provides an overview of the monitor’s features.
Features
Depending on the model, your monitor might include the following features:
Display features
● 60.5 cm (23.8 in) diagonal viewable screen area with 1920 × 1080 resolution, plus full-screen
support for lower resolutions; includes custom scaling for maximum image size while preserving
original aspect ratio
● Liquid crystal display (LCD) with active matrix and in-plane switching (IPS)
● Wide color gamut to provide coverage of sRGB color spaces
● Nonglare panel with an LED backlight
● Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to side
● Tilt, swivel, and height adjustment capabilities
● Pivot capability to rotate the monitor head from landscape to portrait orientation
● Dual Picture in Picture (PiP) and Picture beside Picture (PbP) functionality to enable the DisplayPort
and HDMI inputs to be viewed in each half of the screen (select products only)
● On-screen display (OSD) adjustments in several languages for easy setup and screen optimization
● Color space presets for sRGB and BT.709
● Energy saver feature to meet requirements for reduced power consumption
● Security cable slot on the rear of the monitor for an optional security cable
● Cable management feature for placement of cables and cords
Connectors
● DisplayPort™ video input (cable included)
● DisplayPort video output (cable included)
● High-Definition Multimedia Interface™ (HDMI) video input
● USB hub with one USB Type-B port (select products only) that connects to the computer (upstream)
and four USB ports that connect to USB devices (downstream)
● USB Type-B–to–USB Type-A cable (select products only)
● DisplayPort cable (select products only)
● HDMI cable (select products only)
● Plug and Play capability, if supported by your operating system
Monitor stand
● Removable stand for flexible monitor head mounting solutions
● HP Quick Release 2 device to quickly attach the monitor head to the stand with a simple click, and