EasyManuals Logo

HP Z32k G3 User Manual

HP Z32k G3
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
1. Remove the two screws from the VESA holes located on the rear of the monitor head (1), and then
remove the screw fastener (2).
2. Align the VESA adapter with the screw holes located on the rear of the monitor head (1), and then install
the two screws to secure the adapter (2).
NOTE: The adapter attaches only after you lower the stand mount to the correct position.
3. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the VESA screw holes on the back of the monitor
head.
IMPORTANT: If these instructions do not apply to your device, then follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
10
Chapter 1Getting started

Table of Contents

Other manuals for HP Z32k G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z32k G3 and is the answer not in the manual?

HP Z32k G3 Specifications

General IconGeneral
Color depth10 bit
Pixel pitch0.18 x 0.18 mm
Screen shapeFlat
Pixel density140 ppi
Backlight typeEdge LED
Display diagonal31.5 \
Surface hardness3H
Anti-glare screenYes
Display technologyLCD
Native aspect ratio16:9
Vertical scan range29 - 60 Hz
Maximum refresh rate60 Hz
Horizontal scan range30 - 135 kHz
sRGB coverage (typical)100 %
Display bezel technologyMicro-Edge
Display number of colors1.07 billion colors
Display brightness (typical)400 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1440, 3840 x 2160
Pivot angle-90 - 90 °
Number of OSD languages11
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesCHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR, RUS
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)180 W
Power consumption (standby)0.5 W
Power consumption (typical)35 W
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, DisplayPort, HDMI, Thunderbolt, USB Type-A to USB Type-B
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports1
USB hub version3.2 Gen 1 (3.1 Gen 1)
DisplayPort version1.4
USB upstream port typeUSB Type-B, USB Type-C
USB Power Delivery up to100 W
USB Type-A downstream ports quantity4
Sustainability certificatesENERGY STAR
HP segmentBusiness
Package depth185 mm
Package width816 mm
Package height504 mm
Package weight13700 g
Product colorBlack, Silver
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)217 mm
Width (with stand)713.5 mm
Height (with stand)604.9 mm
Weight (with stand)9000 g
Depth (without stand)47 mm
Height (without stand)415.9 mm

Related product manuals