HP Z32k G3

Technical specicationsA
This section contains technical specications for the physical aspects of your monitor, such as the weight and
viewing dimensions, as well as required environmental operating conditions and power source ranges.
All specications represent the typical specications provided by HP component manufacturers; actual
performance can vary either higher or lower.
NOTE: For the latest specications or additional specications for this product, go to
http://www.hp.com/go/quickspecs/ and search for your specic monitor model to nd the model-specic
QuickSpecs.
80 cm (31.5 in) model
specications
This section provides specications for your monitor.
Table A-1 Technical specications
Specication Measurement
Display, wide-screen 80 cm 31.5 in
Type IPS
Viewable image size 80 cm diagonal 31.5 in diagonal
Maximum weight (unpacked) 9.0 kg 19.8 lbs
Dimensions (include base)
Height (highest position) 60.49 cm 23.81 in
Height (lowest position) 45.49 cm 17.91 in
Depth 21.70 cm 8.54 in
Width 71.35 cm 28.09 in
Tilt –5° to 20°
Swivel +/- 45°
Pivot +/- 90°
Environmental requirements temperature
Operating temperature 5°C to 35°C 41°F to 95°F
Storage temperature –20°C to 60°C –4°F to 140°F
Storage humidity 5% to 95% (noncondensing)
Power source 100 V ac to 240 V ac 50/60 Hz
Input terminal One HDMI port, one DisplayPort connector, one USB Type-B connector, and one
Thunderbolt connector
32 Appendix ATechnical specications