HP Z400 - Workstation User Manual

Deleting RAID volumes
Use the LSI Logic Corporation Configuration Utility to delete SAS RAID volumes.
1. Start the LSI Corporation Configuration Utility. During BIOS start up, you are prompted to Press
Ctrl-C to start LSI Corp. Configuration Utility.
2. On the Main menu of the BIOS-based configuration utility, use the arrow keys to select an adapter.
3. Press Enter to go to the Adapter Properties screen.
4. In the Select New Array Type screen, use the arrow keys to select New Existing Array.
5. In the View Array screen, use the arrow keys to select Manage Array. Press Enter.
6. In the Manage Array screen, use the arrow keys to select Delete Array. Press Enter.
Press Y to delete the array and exit to the adapter properties screen.
ENWW Configuring SAS RAID devices 183

HP Z400 - Workstation Specifications

General

Processor	Intel Xeon W3500 series
Chipset	Intel X58 Express
Memory	Up to 24 GB DDR3 ECC
Storage	Supports SATA drives
Graphics	NVIDIA Quadro or ATI FirePro series
Expansion Slots	2 PCI Express Gen2 x16, 1 PCI Express Gen2 x8
Power Supply	475W
Operating System	Red Hat Enterprise Linux