About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank to cool
before touching it.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
ProcedureProcedure
1. If installed, open the cable management arm.
2. If you are installing a power supply in the power supply bay 2, remove the power supply blank.
Retain the blank for future use.
3. Immediately slide the power supply into the bay until it clicks into place.
To Next Page
Loading...
