Remove the server from the rackRemove the server from the rack
PrerequisitesPrerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
T-25 Torx screwdriver
About this taskAbout this task
To remove the server from a Hewlett Packard Enterprise, Compaq-branded, Telco, or third-party rack:
ProcedureProcedure
1. Power down the server .
2. Disconnect the rear cabling.
3. Extend the server from the rack .
4. Release the rail latches and remove the server from the rack.
To Next Page
Loading...
