DIMM slot locationsDIMM slot locations
Heatsink and processor socket componentsHeatsink and processor socket components
System maintenance switch descriptionsSystem maintenance switch descriptions
PositionPosition DefaultDefault FunctionFunction
S1 Off
Off—iLO security is enabled.
On—iLO security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
S5 Off
Off—Power-on password is enabled.
On—Power-on password is disabled.
S6 Off
f—No function
On—Restore default manufacturing settings
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
To access the redundant ROM, set S1, S5, and S6 to On.
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
to their manufacturing defaults.
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Configuring the server.
DIMM label identificationDIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to locate
specific information about the DIMM.
For more information about product features, specifications, options, configurations, and compatibility, see the HPE DDR5 SmartMemory
QuickSpecs:
https://www.hpe.com/docs/server-memoryhttps://www.hpe.com/docs/server-memory
1
1
1
,
2 3
1
2
3
To Next Page
Loading...
