ItemItem DescriptionDescription
X System maintenance switch
1 Front DisplayPort/USB 2.0 connector
2 OCP slot 14 port 2
3 LP SlimSAS port 2
4 LP SlimSAS port 1
5 Primary riser connector
6 Front I/O & USB 3.2 Gen 1 port connector
7 OCP slot 14 backup power connector
8 SATA optical port
9 Socket 1 MCIO port 1
10 x8 SlimSAS ports
11 Drive box 3 power connector
12 Drive box 2 power connector
13 Drive box 1 power connector
14 Signal connector
15 Internal USB ports
16 Backplane power connector
17 Chassis Intrusion Detection switch connector
18 Socket 2 MCIO port 2
19 Socket 2 MCIO port 1
20 SID connector
21 Secondary riser connector
22 OCP slot 15 backup power connector
23 System battery
24 Energy pack connector
25 NS204i-u power connector
26 Tertiary riser connector
27 Auxiliary power connector for secondary
riser
28 Serial port connector (optional)
29 OCP slot 15 port 1
30 OCP slot 15 port 2
31 Auxiliary power connector for primary riser
The SlimSAS ports are numbered 1B-4B, 1A-4A from left to right. B is for processor 2 and A is for processor 1.
Top = USB 3.2 Gen 1 port, Bottom = USB 2.0 port
SubtopicsSubtopics
System maintenance switch descriptionsSystem maintenance switch descriptions
DIMM label identificationDIMM label identification
1
2
1
2
To Next Page
Loading...
