Installing the processorInstalling the processor
PrerequisitesPrerequisites
T-30 Torx screwdriver
Thermal grease
About this taskAbout this task
CAUTION:CAUTION: To prevent possible server overheating, always populate each processor socket with a processor socket cover
and a processor blank, or a processor and a heatsink.
ProcedureProcedure
1. If you are using the same heatsink, apply the full content of the thermal grease syringes on top of the processor. Follow the pattern
shown in the following image.
2. If you are using a new heatsink, remove the protective film from the thermal interface material.
To Next Page
Loading...
