Rack mounting interfacesRack mounting interfaces
The server rails can be installed in a rack that has the following mounting interfaces:
Round-hole Square-hole Threaded round-hole
The illustrations used in this procedure show an icon on the upper right corner of the image. This icon indicates the type of mounting
interface for which the action illustrated in the image is valid.
Rack rail optionsRack rail options
This server supports rack rail #3 for SFF and LFF drive configurations.
Installing the server into the rackInstalling the server into the rack
PrerequisitesPrerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
To Next Page
Loading...
