HPE StoreOnce 5100

4. Obtain the unique LTU key as instructed on the License Entitlement Certificate. You may use Cut and
Paste to copy it to a temporary file or save it to a .DAT file.
If you save the LTU as a file, sftp it into the StoreOnce System’s licenses directory.
IMPORTANT:
If you cut and paste the string, you must remove the product description from the beginning of
the license string before applying the license to the StoreOnce appliance. Some editors display
the product description on a separate line above the license string; others do not have a line
break before the license string starts. An example product description is: #HPE StoreOnce 16Gb
FC card LTU. (There is no requirement to remove the product description that is displayed in
quotes at the end of the string.)
5. Use the StoreOnce GUI to apply the license, as described in the next section.
Applying a full license
Procedure
1. In the Navigator pane, expand Device Configuration and then click License Management.
2. On the License Management page, click Add License.
3. For the Input Type, select Key String.
NOTE:
See the StoreOnce System User Guide for more information about loading licenses from a file. The
file must already be in the StoreOnce System’s repository directory.
4. In the License Key box, type or paste the license string.
5. See the HPE StoreOnce System User Guide for more information about applying licenses from a
DAT file.
6. Click OK to apply the license and click OK at the license added successfully prompt.
If the license fails, a dialog box will appear that shows error details. Click OK to return to the License
Management page.
NOTE:
For users who prefer to use the StoreOnce CLI, all licenses can be loaded with the single StoreOnce
CLI command license load. This command will load all licenses found in the licenses directory.
See the StoreOnce CLI Reference Guide for more information.
38 Applying a full license