HPE StoreOnce 5100

Figure 11: Rear view of HPE StoreOnce 5500 System disk enclosure
1, 7, 17, 22 Power supplies 2 Power On/Standby button and LEDs
3, 9, 16, 21 Fans 4, 10, 15,
20
I/O module LEDs
5, 11, 13,
18
I/O module SAS port 1 6, 12, 14,
19
I/O module SAS port 2
8 Display
Storage expansion
The HPE StoreOnce 5500 System supports capacity expansion. The server element is used for OS disks
only; base storage in the disk enclosure consists of 11 x 4 TB disks plus four hot plug disks. The HPE
StoreOnce 5500 System supports two models of capacity expansion.
• 44 TB Capacity Upgrade Kit: this is a pack of 11 x 4 TB disks which are added to an enclosure. Up to
five packs may be added to the base storage in a disk enclosure.
• 60 TB Capacity Upgrade Kit: this is an additional enclosure with base storage of 11 x 4 TB disks plus
four hot plug disks. Up to three further 60 TB Capacity Upgrades may be connected, and these may
also be expanded using the 44 TB Capacity Upgrade kits. It is not necessary to fill an enclosure before
adding the next.
Refer to SAS cabling for HPE StoreOnce 5500 Systems on page 12 for cabling examples,
HPE StoreOnce 3100 System
The HPE StoreOnce 3100 System comprises a 1U 4–disk server, that provides four 1 GbE ports for
connecting to an Ethernet network. It does not support 10 GbE Network or Fibre Channel connection.
The base configuration has a single power supply.
70 Storage expansion