HPE StoreOnce 5100

Task Refer to
9 Configure email.
Setting up StoreOnce email alerts on page
43
10 Configure SNMP.
Setting up SNMP (Simple Network
Management Protocol) on page 46
11 Apply the SSL certificate.
Generating the SSL certificate on page
49
12 If necessary, expand storage.
Expanding storage capacity, if supported
on page 50
13 Check software version.
Checking for the latest software on page
53
14 Configure Remote Support via STaTS.
Configuring Remote Support on page 31
15 Configure the network.
Complete network configuration on page
55
16 Configure Fibre Channel.
Fibre Channel with StoreOnce Systems on
page 84
17 Complete configuration.
Additional configuration tasks on page
63
18 Use the StoreOnce CLI to run a confidencecheck
report on the system.
Running a StoreOnce system confidence
check on page 64
HPE StoreOnce Systems
HPE StoreOnce 5500 System
Table 2: HPE StoreOnce 5500 System
Storage capacity 60 TB (11 x 4 TB disks + 4 hot spare)
Maximum capacity = 1120 TB
Storage Expansion Options There are two options:
Add up to five 44 TB Capacity Upgrade disk packs
(containing eleven 4 TB disks) to each enclosure
Add up to three 60 TB Capacity Upgrade disk
enclosures (containing eleven 4 TB disks + 4 hot
spare)
StoreOnce Optional Hardware Four PCIe slots are available for 10 GbE Network
and FC PCIe cards.
See Optional PCIe cards on page 76.
8 HPE StoreOnce Systems