NOTE:
VLAN tagging is not supported with Bonding Mode 6.
6. At this point you may choose to define the Subnets for the Port Set or to create additional Port Sets by
clicking on Add in the Port set section. For the purposes of this example, we shall continue to Subnet
configuration.
TIP:
It is good practice to Save the network configuration at regular intervals.
Creating subnets
Procedure
1. Select the Port Set and click Add in the Subnet section.
Table 13: Network Configuration New Subnet fields
Name Description
Name The name of the Subnet
Protocol Select IPv4 or IPv6.
Table Continued
60 Creating subnets
To Next Page
Loading...
