NOTE:
If there is an existing configuration that you wish to use as a template, select it from the Copy
Existing drop-down list.
4. As appropriate, select IPv4 or IPv6 for any DNS servers and enter the required addresses in the
appropriate format. Click Save.
Table 11: Network Configuration IP protocol and DNS fields
Field name Description
Name of the configuration This reflects the name of the configuration
selected in the list.
Protected This checkbox is always greyed out for the
Current and Factory Default configurations
because they cannot be edited. Custom
configurations can be edited and the checkbox is
active to indicate their protection status.
DNS server details:
These settings apply across all other settings.
Table Continued
Complete network configuration 57
To Next Page
Loading...
