HPE StoreVirtual 3200

Figure 21: Configuration using four Fibre Channel ports and two switches
1. Servers 2. Fibre Channel SAN
3. StoreVirtual storage system 4. Network cloud connections
5. 1 GbE iSCSI SAN
Connecting the StoreVirtual 3200 drive enclosure
Up to three HPE StoreVirtual 3200 drive enclosures can be connected to the array enclosure. The drive
enclosures must be connected to the array enclosure using an asymmetric cabling scheme as shown in
the following figures. The storage controllers must connect directly to the drive enclosure I/O modules.
Connecting to one drive enclosure
1
2
Figure 22: One drive enclosure cabling configuration
1. Array enclosure 2. Drive enclosure
36 Connecting the StoreVirtual 3200 drive enclosure