Removing and replacing the front panel/drive cage assembly
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove all drives.
6. Remove the front panel/drive cage assembly.
To replace the component, reverse the removal procedure.
Removing and replacing a mezzanine option card
Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel.
5. Remove the mezzanine option card.
Removing and replacing the front panel/drive cage assembly 37
To Next Page
Loading...
